Chinese manufactured copy of a late Mauser Banner Bolo, this one with a 6 digit serial number and a large Mauser banner. The gun is matching including the bolt stop in which the “8” was omitted, though grips were not removed. Safety missing. As per the Mauser, this copy has a 4″ barrel, a fixed front sight and a slip-in rear sight graduated from 50-1000. Short extractor and two lug firing pin. Chamber with spurious 3-line pseudo-Mauser address. Full serial number on left chamber flat and C/C/U on left side of barrel extension. Full serial number repeated on subframe and frame. Last few digits on the bolt, bolt stop, hammer, transfer bar, and locking block. Walnut grips. No lanyard ring.
Synopsis:
Chinese copy of a Mauser Banner Bolo in 7.63mm.
Condition:
Generously G- with most blue now faded to a uniform gray with extensive patchy discolorations and shallow pitting as imaged. Shrapnel damage to upper portion of magazine well. Trigger return spring is weak and hammer needs some prodding/manipulation to fall. Missing safety. Dull bore with sharp rifling. If you want a nice gun or one to fire on the range, this is not for you. SOLD AS A HISTORIC ARTIFACT. NOT TO BE FIRED! NOT TO BE FIRED! NOT TO BE FIRED!
Chinese, Copy, Mauser Banner, 876821, PCA-81
$895.00
Chinese copy of a Mauser Banner Bolo in 7.63mm.
Watch our video on Warlord Guns (link). And of course watch Forgotten Weapon’s video on Warlord guns (link) and Ian’s video announcing the new Chinese Warlords book (link). Many of our guns will be featured and described in this upcoming book!
1 in stock
Description
Description:
Chinese manufactured copy of a late Mauser Banner Bolo, this one with a 6 digit serial number and a large Mauser banner. The gun is matching including the bolt stop in which the “8” was omitted, though grips were not removed. Safety missing. As per the Mauser, this copy has a 4″ barrel, a fixed front sight and a slip-in rear sight graduated from 50-1000. Short extractor and two lug firing pin. Chamber with spurious 3-line pseudo-Mauser address. Full serial number on left chamber flat and C/C/U on left side of barrel extension. Full serial number repeated on subframe and frame. Last few digits on the bolt, bolt stop, hammer, transfer bar, and locking block. Walnut grips. No lanyard ring.
Synopsis:
Chinese copy of a Mauser Banner Bolo in 7.63mm.
Condition:
Generously G- with most blue now faded to a uniform gray with extensive patchy discolorations and shallow pitting as imaged. Shrapnel damage to upper portion of magazine well. Trigger return spring is weak and hammer needs some prodding/manipulation to fall. Missing safety. Dull bore with sharp rifling. If you want a nice gun or one to fire on the range, this is not for you. SOLD AS A HISTORIC ARTIFACT. NOT TO BE FIRED! NOT TO BE FIRED! NOT TO BE FIRED!
Additional information
PCA-81
FFL, CNR
876821
7.63mm
Chinese
China
Pre WWI
China
Related products
1906 Swiss Luger, Military, Cross in Shield, I-203
$2,995.00 ReserveSIG P210-6, Heavy Frame, Swiss Pistol, Cased, P325231, FB01144
$8,995.00 ReserveFN 1903 Pistol, Shoulder Stock Rig, C-9
$8,995.00 Reserve